- CC17: Unicorn
- 29 Jun 2016 03:39:28 pm
- Last edited by Unicorn on 06 Mar 2018 02:40:51 am; edited 1 time in total
EDIT: It's now in the archives https://www.cemetech.net/programs/index.php?mode=file&path=/84pce/asm/games/SwitchOperator.zip
Hey everyone! I've decided to enter this contest with an idea of my own
I just came up with a better idea for a game, without complex storylines and complicated mechanics. Without further ado, let me present Switch Operator!
---------------------------
Switch Operator
---------------------------
You take the place of a switch operator at a railroad tunnel. There are four lines, and each one has a gate for the trains to go through. Your job is to control the gates, as there are no sensors installed on the inside of this tunnel, so the gates only open automatically for incoming trains. You have to make sure that the trains don't run into a gate or some other obstacle. Only one gate can be open at a time, so you are constantly opening and closing them. Sometimes a gate will get stuck and you will have to make the train switch to an above or below track, and open the gate there. As the game progresses, the railroad upgrades their gate system so that multiple can be open at once, but they close automatically.
---------------------------
You will need to be fast with your fingers, as the gates are controlled by the numbers [0], [1], [4], [7] (the western gates) and [(-)], [3], [5], [9] (the eastern gates). The switches are controlled by simultaneously pressing [.], [2], [5], or [8] for the corresponding track, and pressing the arrow key in the direction you want to switch it towards, North or South (or up and down)
So I'm not sure how this question thing will work, but I can ask any manner of questions having to do with the C libraries and I will not be penalized?
Hey everyone! I've decided to enter this contest with an idea of my own
I just came up with a better idea for a game, without complex storylines and complicated mechanics. Without further ado, let me present Switch Operator!
---------------------------
Switch Operator
---------------------------
You take the place of a switch operator at a railroad tunnel. There are four lines, and each one has a gate for the trains to go through. Your job is to control the gates, as there are no sensors installed on the inside of this tunnel, so the gates only open automatically for incoming trains. You have to make sure that the trains don't run into a gate or some other obstacle. Only one gate can be open at a time, so you are constantly opening and closing them. Sometimes a gate will get stuck and you will have to make the train switch to an above or below track, and open the gate there. As the game progresses, the railroad upgrades their gate system so that multiple can be open at once, but they close automatically.
---------------------------
You will need to be fast with your fingers, as the gates are controlled by the numbers [0], [1], [4], [7] (the western gates) and [(-)], [3], [5], [9] (the eastern gates). The switches are controlled by simultaneously pressing [.], [2], [5], or [8] for the corresponding track, and pressing the arrow key in the direction you want to switch it towards, North or South (or up and down)
So I'm not sure how this question thing will work, but I can ask any manner of questions having to do with the C libraries and I will not be penalized?