I know one of the major issues with writing programs with more direct access to the calculator's hardware is the limitations put in place by TI-OS, and flashing a custom OS is blocked by the boot code which checks for a signature from TI. The section of flash memory that contains this code is write protected. So to be able to add a custom OS to the calculator (a permanent one at least) one would likely have to replace the flash chip entirely with one that does not contain the signature check code. I've looked around online but have been unable to find the exact flash chip (or set of compatible chips) that the TI-84+CE uses, and I'm not exactly keen on taking mine apart to find out, I still need it for school. Does anyone know?

P.S. I know that I wouldn't be able to do this myself, I don't have the programming knowledge nor the soldering skill for it. This is simply for curiosity's sake. If I got anything wrong please let me know as well.
The pre-revision-M chip is https://www.winbond.com/resource-files/w29gl032c_revh%20v3.0.pdf
It's the same chip used in the monochrome calcs, so you can use the commands on this page: http://wikiti.brandonw.net/index.php?title=83Plus:OS:Raw_Flash_Commands

I'm not sure what chip the Revision M / 83PCE EP uses, but it's very different.

The flash chip isn't super secure, and there are at least two different ways to overwrite parts of the boot code on pre-rev-M calcs. There's really not much reason to do so, though, as most OS tweaks can be done with hooks. You can "directly access" most of the calc's hardware even with the OS in place while running a program.

EDIT: since I didn't have the revM datasheet bookmarked, here it is: https://www.winbond.com/resource-files/w25q32jv%20spi%20revc%2008302016.pdf
and the wikiti page: http://wikiti.brandonw.net/index.php?title=84PCE:OS:Serial_Flash_Commands
Register to Join the Conversation
Have your own thoughts to add to this or any other topic? Want to ask a question, offer a suggestion, share your own programs and projects, upload a file to the file archives, get help with calculator and computer programming, or simply chat with like-minded coders and tech and calculator enthusiasts via the site-wide AJAX SAX widget? Registration for a free Cemetech account only takes a minute.

» Go to Registration page
Page 1 of 1
» All times are UTC - 5 Hours
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum